Lil MAC
Curb Machines
Curb Machines
You can "make a curb" with the 'Lil MACtm curb machine by following these quick and easy instructions: 1. Dig a trench 2" deep by 9" wide. 2. Mix 3 1/2 parts sand with 1 part cement. It is very important that the mix is not too wet (0"-1" slump). 3. Place the mixed material into the 'Lil MACtm curb machine and begin ramming the material with the handle. Continue this process until desired curb has been produced. 4. Use the curb trowel to smooth over any rough surfaces on the newly extruded curb. 5. Slice half way through the curb with a knife or flat trowel at a distance of about 3' apart. This will control unwanted cracks. Options: 1. Use a paint Brush or a sprayer to apply liquid concrete stain. 2. Use a brick tool to cut in a simulated brick design. |
Who can benefit by owning a 'Lil MACtm curb machine? Landscapers, do-it-your-selfers, general contractors, landlords, concrete contractors, rental yards, and anyone wanting part time income or full time income. |
 | |  | |  | |  | |  | |  | |  |
| | | | | | | | | | | | |